Resource Management; Resource Capacity - Polycom RealPresence 800s Administrator's Manual

After resetting the MCU a delay may occur when synchronizing with the external NTP server.

Resource Management

Resource Capacity

The following table describes the resource capacity allocations for theRealPresence
Collaboration Server 800s per Resource type.
Table 20-4
Resource Type
VoIP Ports
CIF Ports
SD Ports (4CIF)
HD 720p30 Ports
Polycom, Inc.
Table 20-2 RMX Time – Fields Properties (Continued)
Field
GMT Offset
Retrieve Client Time
Use NTP Server
Adjust Reservations
Time
(Button)
System Resource Capacity Per Resource Type
Description
The time zone difference between Greenwich and the MCU's
physical location in hours and minutes.
Select the Up or Down arrows to alter the GMT Offset time on the
MCU. To enter a negative offset either type a minus in the hour box or
use the down arrow and decrease the offset below zero.
Click this button to automatically update the MCU's GMT Date, Time
and Offset to match that of the workstation.
Select this check box to synchronize the time with up to three NTP
servers. When selected, the manual GMT Date and GMT Time
setting options are disabled. The GMT Offset fields are still active.
To implement this mode an external connection to an NTP server
must be enabled.
Enter the IP addresses of the required NTP servers in order of
precedence.
The Status field indicates whether registration with the NTP Server
failed or succeeded.
Note: TheCollaboration Server will not use a time source such as a
Windows-based, W32Time service (SNTP) time service. Only full-
featured (below Stratum 16) NTP Servers are considered sufficiently
reliable for high-accuracy timing environments.
Use this button to adjust the start time of all the reservations in one
operation. For more information see "Adjusting the Start Times of all
Reservations" on page 9-16
Number of Resources
120
40
40
20
Chapter 20-MCU Administration and Utilities
20-5