Standard Event Record Fields - Polycom RealPresence 800s Administrator's Manual

Table C-1
Field
GMT Offset
File Retrieved
Event Records
The event records, that is, all records in the unformatted file except the first record, contain
standard fields, such as the event type code and the time stamp, followed by fields that are
event specific.
The event fields are separated by commas. Two consecutive commas with nothing between
them (,,), or a comma followed immediately by a semi-colon (,;), indicates an empty field, as
in the example below:

Standard Event Record Fields

All event records start with the following fields:
•
•
•
•
Polycom, Inc.
Conference Summary Record Fields (Continued)
Description
The time zone difference between Greenwich and the Collaboration
Server's physical location in hours and minutes.
Together with the GMT Offset Sign field the GMT Offset field is used to
define the Collaboration Server local time. For example, if the GMT
Offset Sign is 0 and GMT Offset is 3 hours then the time zone of the
Collaboration Server's physical location is -3, which will be subtracted
from the GMT time to determine the local time. However, if the GMT
Offset Sign is 1 and GMT Offset is 4 hours then the time zone of the
Collaboration Server's physical location is +4, which will be added to the
GMT time to determine the local time.
Indicates if the file has been retrieved and saved to a formatted file, as
follows:
0 - No
1 - Yes
The CDR event type code. For a list of event type codes and descriptions, refer to
Table C-2, "CDR Event Types," on page C-4.
The event date.
The event time.
The structure length. This field is required for compatibility purposes, and always
contains the value 0.
Appendix C-CDR Fields - Unformatted File
C-3