Polycom RealPresence 800s Administrator's Manual page 555

Table B-1 Active Alarms (Continued)
Alarm Code
Error reading MCU time
eUserMsgCode_Cs_EdgeServerDnsFaile
d
eUserMsgCode_Cs_SipTLS_CertificateH
asExpired
eUserMsgCode_Cs_SipTLS_CertificateS
ubjNameIsNotValid_Or_DnsFailed
eUserMsgCode_Cs_SipTLS_Certificate
WillExpireInLessThanAWeek
eUserMsgCode_Cs_SipTLS_FailedToLo
adOrVerifyCertificateFiles
eUserMsgCode_Cs_SipTLS_Registration
HandshakeFailure
eUserMsgCode_Cs_SipTLS_Registration
ServerNotResponding
Event Mode Conferencing resources
deficiency due to inappropriate license.
Please install a new license
External NTP servers failure
Failed to access DNS server
Failed to configure the Media card IP
address
Failed to configure the Users list in Linux
Failed to connect to application server
Failed to connect to recording device
Failed to connect to SIP registrar
Polycom, Inc.
Alarm Description
Failed to read MCU time configuration file ([status]).
Manually configure the MCU Time in the Collaboration Server Web Client or
RMX Manager Manager application.
The MCU could not connect to any of the defined NTP server for
synchronization due to the remote server error or network error or
configuration error.
Change the configuration of the NTP server.
Failed to access DNS server.
Possible reasons for the failure:
•
Failure type: [OK Or Not supported.
•
Does not exist Or IP failure.
•
Duplicate IP Or DHCP failure.
•
VLAN failure Or Invalid: [status_Number].
The authentication process did not start.
Use the Restore to factory Defaults to recover.
Possible reasons for the failure:
•
Failed to connect to application server:
•
Failed to establish connection to server, url = [url].
The MCU could not connect to the defined recording device due to
configuration error or network error.
Cannot establish connection with SIP registrar.
Appendix B-Active Alarms
B-3