Polycom RealPresence 800s Administrator's Manual page 583

Table C-17
Field
Participant Status
Capabilities
Remote
Communication
Mode
Secondary Cause
Polycom, Inc.
Event Fields for Events 17, 23 - H323 PARTICIPANT CONNECTED, SIP PARTICIPANT
CONNECTED (Continued)
Description
The participant status, as follows:

0 - Idle

1 - Connected
2 - Disconnected
3 - Waiting for dial-in
4 – Connecting
5 - Disconnecting
6 - Partially connected. Party has completed H.221 capability exchange
7 - Deleted by a user

8 - Secondary. The participant could not connect the video channels and is
connected via audio only
10 - Connected with problem
11 - Redialing
Not supported.
Always contains the value 0.
Not supported.
Always contains the value 0.
Note: This field is only relevant if the Participant Status is Secondary.
The cause for the secondary connection (not being able to connect the video
channels), as follows:
0 - Default
11 - The incoming video parameters are not compatible with the conference
video parameters
13 - The conference video settings are not compatible with the endpoint
capabilities
14 - The new conference settings are not compatible with the endpoint
capabilities
15 - Video stream violation due to incompatible annexes or other
discrepancy
16 - Inadequate video resources
17 - When moved to a Transcoding or Video Switching conference, the
participant's video capabilities are not supported by the video cards
18 - Video connection could not be established
24 - The endpoint closed its video channels
25 - The participant video settings are not compatible with the conference
protocol
26 - The endpoint could not re-open the video channel after the conference
video mode was changed
27 - The gatekeeper approved a lower bandwidth than requested
28 - Video connection for the SIP participant is temporarily unavailable
255 - Other
Appendix C-CDR Fields - Unformatted File
C-21