Polycom RealPresence 800s Administrator's Manual page 559

Table B-1 Active Alarms (Continued)
Alarm Code
MPL startup failure. Authentication not
received.
MPL startup failure. Management
Network configuration not received.
Network interface is not configured. New
interface need to be chosen
Network traffic capture is on
New certificate for CS need Collaboration
Server reset to take effect
No default IVR Service in IVR Services
list
No IP Network Services defined
No LAN connection
No response from Central Signaling
No RTM-LAN or RTM-ISDN installed.
One of these cards must be installed in
the RealPresence Collaboration Server
(RMX) 4000
No usable unit for audio controller
OCS Registration failed
Password expiration warning
Please install a newer version
Port configuration was modified
Power off
Power Problem Level Critical
Power Problem Level Major
Product activation failure
Product Type mismatch. System is
restarting.
Received Notification failed
Recording device has disconnected
unexpectedly
Polycom, Inc.
Alarm Description
Authentication was not received from Switch.
Check the switch card.
Management Network message was not received.
Check the Switch card.
No default IVR Service in IVR Services list.
Ensure that one conference IVR Service and one EQ IVR Service are set as
default.
IP Network Service parameters missing.
Configure the IP Network Service.
No connection with central signaling.
No media card is installed, or the media card installed is not functioning.
Install the appropriate media card.
Assign a new activation key.
The user is alerted to a mismatch between the product type that is stored in
MCU software and the product type received from another system component.
In such a case the system is automatically restarted.
Appendix B-Active Alarms
B-7