Default Profile Settings In Cp Conferencing Mode - Polycom RealPresence 800s Administrator's Manual

Polycom® RealPresence Collaboration Server 800s Administrator's Guide

Default Profile Settings in CP Conferencing Mode

The Collaboration Server is shipped with a default Conference Profile for CP conferences
which allows users to immediately start standard ongoing CP conferences. These are also
the default settings when creating a new Profile. The default settings are as follows:
Table 2-2
Setting
Profile Name
Line Rate
Operator Conference
Encryption
Packet Loss Compensation (LPR
and DBA)
Auto Terminate
Auto Redialing
Exclusive Content Mode
Enable FECC
Video Quality
Maximum Resolution
Content Settings
Content Protocol
Presentation Mode
Same Layout
Lecturer View Switching
Auto Scan Interval
Auto Layout
Mute participants except the lecturer
Skin
IVR Name
Recording
Site Names display
Network Services - SIP Registration
Network Services - Accept Calls
2-8
Default CP Only Conference Profile Settings
Value
Factory_Video_Profile
384Kbps
Disabled
Disabled
Enabled
•
After last participant quits - Enabled
•
When last participant remains - Disabled
Disabled
Disabled
Enabled
Sharpness
Auto
Graphics
H.263 & H.264 Auto Selection
Disabled
Disabled
Disabled
Disabled (10)
Enabled
Disabled
Polycom
Conference IVR Service
Disabled
Disabled
Disabled
Enabled
Polycom, Inc.