Setting A Network Service As Default - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server 800s Administrator's Guide
13 Click the SIP Servers tab.
14 Define the Primary and Alternate SIP Server for this network Service.
•
•
15 Click the Security tab.
16 Optional. To configure the ICE environment, click the SIP Advanced tab.
17
18 Click the OK button.

Setting a Network Service as Default

The default Network Service is used when no Network Service is selected for the following:
•
In addition, the Signaling Host IP address and the MCU Prefix in GK displayed on the
Collaboration Server Web Client main screen are taken from the default H.323 Network
Service.
One IP Network Service can be defined as default for H.323 connections and another
Network Service as default for SIP connections. If the IP Network Service supports both
H.323 and SIP connections, you can set the same Network Service as default for both H.323
and SIP, or for H.323-only or for SIP-only.
To designate an IP Network Service as the default IP Network Service:
1
2
16-40
If Microsoft Office Communications or Lync server are part of this network service, a certificate
must be created for this network service. If each network connected to the Collaboration Server
includes Microsoft Office Communications or Lync server, separate certificates must be created
and sent to the Collaboration Server for each of these networks.
If the Network Service does not include a DNS, you must use the IP address of the SIP Server
instead of its name.
The field definitions of the SIP Servers tab are the same as for the Default IP Network
Service. For more information see the Polycom® RealPresence Collaboration Server 800s
Administrator's Guide, "Click the SIP Servers tab." on page 16-16.
The field definitions of the Security tab are the same as for the Default IP Network Service.
For more information see the Polycom® RealPresence Collaboration Server 800s
Administrator's Guide, "Click the Security tab." on page 16-18.
Modify the following fields:
Table 16-26 Default IP Network Service – SIP Advanced
Field
Server User Name
ICE Environment
The new Network Service is added to the IP Network Services list pane.
Dial out participants
In the Device Management pane, click IP Network Services (
In the Network Services list pane right-click the IP Network Service to be set as the
default, and then click Set As H.323 Default, or Set As SIP Default.
Description
Enter the User name for this service as defined in the Active
Directory. For example, enter rmxNet2.
This field is disabled if the ICE Environment field is set to None.
Select MS (for Microsoft ICE implementation) to enable the ICE
integration.
).
Polycom, Inc.