Hardware Monitor Toolbar; Viewing The Properties Of Realpresence Collaboration Server 800S Hardware Components - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server 800s Administrator's Guide

Hardware Monitor Toolbar

The following buttons appear in the toolbar of the Hardware Monitor:
Table 22-2
Button
Viewing the Properties of RealPresence Collaboration
Server 800s Hardware Components
The properties displayed for the hardware components will vary according to the type of
component viewed. These component properties can be grouped as follows:
•
•
No properties are provided for Power Supply (PWR).
22-2
Table 22-1 Hardware Monitor Pane Columns (Continued)
Field
Temperature
Voltage
Hardware Monitor Toolbar Buttons
Name
System Reset
System Shut Down
MCU Properties (RealPresence Collaboration Server 800s)
Supporting Hardware Components Properties (FANS, LAN)
Description
Monitors the temperature of the hardware components; Normal,
Major and Critical.
Note: Critical condition invokes a system shut down.
The voltage threshold of the hardware component; either Normal or
Major.
Description
Resets and restarts the system. Resetting saves settings and
information that you changed in the system, i.e. IP Services,
etc...
Shuts down the system into a standby mode. When the user in
the RMX Manager Manager/Web Client presses the System
Shut Down (red) button in the Hardware Monitor toolbar, the
system should enter a standby mode and the LED turns ON.
Only the media and control unit cards are in a standby mode.
Shelf Manager remains active.
Turn the system OFF/ON to exit the standby mode.
Polycom, Inc.