Polycom RealPresence 800s Administrator's Manual page 654

Polycom® RealPresence Collaboration Server 800s Administrator's Guide
4
5
6
I-8
Click the DNS tab.
In the DNS field, select Specify to define the DNS parameters.
View or modify the following fields:
Table 10 Management Network Properties – DNS Parameters
Field
MCU Host Name
Shelf Management
Host Name
DNS
Register Host Names
Automatically to DNS
Servers
Local Domain Name
Description
Enter the name of the MCU on the network. This name must be
identical to the FQDN name defined for the Collaboration Server in
the OCS and DNS.
Default name is Collaboration Server.
Displays the name of the entity that manages the Collaboration
Server hardware. The name is derived from the MCU host name.
Default is RMX_SHM.
Select:
•
Off – if DNS servers are not used in the network.
•
Specify – to enter the IP addresses of the DNS servers.
Note: The IP address fields are enabled only if Specify is selected.
Select this option to automatically register the MCU Signaling Host
and Shelf Management with the DNS server.
Enter the name of the domain where the MCU is installed as defined
in the Office Communications Server/Lync Server.
Polycom, Inc.