Polycom RealPresence 800s Administrator's Manual page 441

15 Define the following parameters:
Table 20-16
Field
Send Authentication
Trap
Accept Host
Community Name
Accept SNMP
Packets from all Host
Accept SNMP
Packets from the
following Hosts
User Name
Security Level
Authentication
Protocol
Authentication
Password
Privacy Protocol
Privacy Password
Engine ID
16 To specifically define one or more valid terminals, ensure that the Accept SNMP Packets
Polycom, Inc.
SNMP - Security
Description
Select this check box to send a message to the SNMP
Manager when an unauthorized query is sent to the MCU.
When cleared, no indication will be sent to the SNMP
Manager.
Enter the string added to queries that are sent from the SNMP
Manager to indicate that they were sent from an authorized
source.
Note: Queries sent with different strings will be regarded as a
violation of security, and, if the Send Authentication Trap
check box is selected, an appropriate message will be sent to
the SNMP Manager.
Select this option if a query sent from any Manager terminal is
valid. When selected, the Accept SNMP Packets from These
Hosts option is disabled.
Lists specific Manager terminals whose queries will be
considered as valid. This option is enabled when the Accept
SNMP Packets from any Host option is cleared.
Enter a User Name of up to 48 characters
Default: Empty
Select a Security Level from the drop-down menu.
Range: No Auth, No Priv; Auth, No Priv; Auth, Priv
Default: Auth, Priv
Select the authentication
protocol
Range: MD5, SHA
Default: MD5
Enter an Authentication
Password.
Range: 8 - 48 characters
Default: Empty
Select a Privacy Protocol.
Range: DES, AES
Default: DES
Enter a Privacy Password.
Range: 8 - 48 characters
Default: Empty
Enter an Engine ID to be used
for both the Agent and the Trap.
Default: Empty
from any Host option is cleared and then click the Add button.
Chapter 20-MCU Administration and Utilities
These fields are enabled if
Authentication is selected
in the Security Level field.
These fields are enabled if
Privacy is selected in the
Security Level field.
Versions
1 & 2
Version
3
20-27