Connecting To The Collaboration Server Via Modem; Procedure 1: Install The Rmx Manager; Procedure 2: Configure The Modem - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server 800s - Administrator's Guide

Connecting to the Collaboration Server via Modem

Remote access to the Collaboration Server's Alternate Management Network is supported via
an external PSTN <=> IP modem.
To connect via modem to the Alternate Management Network the following procedures must
be performed:
1
2
3
4

Procedure 1: Install the RMX Manager

Before installing the RMX Manager, verify that you have at least 150Mb of free space on your
workstation.
For more information see "Installing the RMX Manager" on page 19-2.

Procedure 2: Configure the Modem

Configure the modem as follows:
•
•
None of the reserved IP addresses listed in Table F-1 on page
Address.
F-6
Procedure 1: Install the RMX Manager – the web client enables direct access to the
Collaboration Server for support purposes.
Procedure 2: Configure the modem – by assigning it an IP address on a specific subnet
in the Alternate Management Network.
Procedure 3: Create a dial-up connection – using the Windows New Connection Wizard.
Procedure 4: Connect to the Collaboration Server – via the RMX Manager.
IP address – near
169.254.192.nn
Subnet Mask –
255.255.240.0
F-3 should be used for the IP
Polycom, Inc.