Polycom RealPresence 800s Administrator's Manual page 639

5
6
7
8
9
10 Start the RealPresence Collaboration Server Web Client application on the workstation.
Polycom, Inc.
In the Initial Setup Utility dialog box, click the Restore to Factory Security Defaults link.
The Restore to Factory Security Defaults dialog box is displayed.
Click OK.
Remove the USB key from the PC workstation.
Insert the USB key in any USB port of the RealPresence Collaboration Server 800s.
Turn off the RealPresence Collaboration Server 800s, then turn it on.
In the browser's address line, enter the IP address of the Control Unit in the format:
a
http://<Control Unit IP Address>
b Click Enter.
Appendix H-Restoring Defaults and System Recovery
.
H-3