Manually Adding And Deleting System Flags - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server 800s Administrator's Guide
3
4
5
6
7
For flag changes (including deletion) to take effect, reset the MCU. For more information see
"Resetting the Collaboration Server" on page 20-57.

Manually Adding and Deleting System Flags

To add a flag:
1
2
3
21-12
To modify a flag value, double-click or select the flag and click the Edit Flag button.
In the New Value field, enter the flag's new value.
Click OK to close the Update Flag dialog box.
Repeat steps 2–4 to modify additional flags.
Click OK to close the System Flags dialog box
In the System Flags dialog box, click the New Flag (
The New Flag dialog box is displayed.
In the New Flag field enter the flag name.
In the Value field enter the flag value.
The following flags can be manually added to the
Table 21-2 Manually Added System Flags – MCMS_PARAMETERS
Flag
802_1X_CERTIFICATE_MO
DE
MCMS_PARAMETERS tab
Description
Not supported with RealPresence Collaboration Server 800s.
) button.
:
Polycom, Inc.