Procedure C: Restore The System Configuration From The Backup - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server 800s Administrator's Guide
7
8
9
10 Turn off the RealPresence Collaboration Server 800s, then turn it On.
11 Start the RealPresence Collaboration Server Web Client application on the workstation.
12 Optional. Restore the system using Procedure C: Restore the System Configuration From the

Procedure C: Restore the System Configuration From the Backup

To restore configuration files:
1
2
3
4
5
H-8
Click OK.
Remove the USB key from the PC.
Insert the USB key in any USB port of the RealPresence Collaboration Server 800s.
a In the browser's address line, enter the IP address of the Control Unit in the
following format:
http://<Control Unit IP Address>,
as defined in the USB key. If no Control Unit IP Address was defined, the IP address
will be 192.168.1.254.
Click Enter.
b
When the RealPresence Collaboration Server Web Client Login window is displayed, the
system was successfully restored to factory defaults.
Backup below.
On the Collaboration Server Menu, click Administration > Software Management >
Restore Configuration.
Browse to the Restore Directory Path where the backed up configuration files are stored.
Click the Restore button.
When the Restore is complete, restart the RealPresence Collaboration Server 800s.
RealPresence Collaboration Server 800s system settings, with the exception of User
data, are restored.
Restore User data by repeating Step 1 to Step 3 of this procedure.
Polycom, Inc.