Removing An Mcu From The Mcus Pane; Changing The Rmx Manager Language - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server 800s Administrator's Guide

Removing an MCU from the MCUs Pane

An MCU can be removed from the RMX Manager. This function should be used if the MCU
hardware was disconnected and removed from the network.
To Remove an MCU from the list:
1
2

Changing the RMX Manager Language

You can change the language of the RMX Manager menus and dialog boxes. Only one
language can be selected at a time and the RMX Manager application must be restarted after
changing the display language.
To select a language:
1
19-20
b Right-click the MCU icon and then click Disconnect MCU.
The MCU icon changes to disconnected and any ongoing conference running on that
MCU will not be monitored in this RMX Manager; they are removed from the
Conferences pane. This MCU can still be monitored and controlled by other users.
Use one of the following methods:
a Select the MCU to disconnect and click the Delete
b Right-click the MCU icon and then click Remove MCU.
A confirmation message is displayed.
Click OK to confirm or Cancel to abort the operation.
The MCU icon is removed from the MCUs pane.
On the RMX Manager menu, click Setup > Customize Display Settings > Multilingual
Settings.
button.
Polycom, Inc.