Content Protocols - Polycom RealPresence 800s Administrator's Manual

Polycom® RealPresence Collaboration Server 800s Administrator's Guide
Table 3-4
Bit Rate Allocated to Content
Channel (Kbps)
From 64 and less than 512
From 512 and up to 1536
SVC Only and Mixed CP and SVC Content Setting
The Content channel is transmitted in Graphics mode only.

Content Protocols

Two Content Protocols can be used for sharing content:
•
•
H.264 offers higher quality content, but is not supported by legacy endpoints. Depending on
the endpoints capabilities, you can determine the content sharing experience by selecting
the appropriate protocol and system behavior from the Content Protocol list:
•
•
•
•
H.263 & H.264 Auto Selection (AVC CP Default)
The H.263 & H.264 Auto Selection option should be selected when Content is to be shared
using a mix of H.263-supporting and H.264-supporting endpoints.
Bit rate allocation to the Content channel by the Collaboration Server is dynamic according
to the conference line rate and Content Setting selected for the conference.
If an endpoint that supports only H.263 for Content Sharing connects to a conference with
Content Protocol set to H.263 & H.264 Auto Selection:
•
•
•
•
•
•
3-8
Content - Maximum Resolution, Frames/Second per Bit Rate Allocation
H.263 (CP and mixed CP and SVC)
H.264 (all conferencing modes)
H.263 & H.264 Auto Selection
H.263 (AVC CP Only)
H.264 HD (AVC CP Only)
H.264 Cascade and SVC Optimized (all conferences)
Content is shared using H.263 even if H.264-supporting endpoints are connected.
Content is shared using H.264 if all connected endpoints have H.264 capability.
If the first endpoint to connect to the conference only supports H.263, the H.263 protocol
is used for Content for all conference participants.
If Content is already being shared using the H.264 protocol when a H.263 endpoint
connects, Content sharing is stopped and must be manually restarted using H.263 (i.e.
the endpoint using H.263 Content Protocol must connect first), for all participants to
receive content. If the H.263 endpoint disconnects, Content sharing must be manually
stopped and restarted and will automatically upgrade to the H.264 protocol.
Endpoints that do not have at least H.263 capability can connect to the conference but
cannot share Content.
This option is not available in SVC Conferencing Mode and CP and SVC Conferencing
Mode.
Maximum Resolution
H.264 HD720p
H.264 HD720p
AVC CP Only)
(
Content
Frames/Second
5
30
Polycom, Inc.