Tmp Event Messages; Tmp8500; Tmp8501 - Dell PowerEdge VRTX Reference Manual

TMP Event Messages

TMP8500

Message I/O Module
Arguments
Detailed The temperature of the I/O Module identified in the message has increased beyond the
Description operational range. Thermal protection shut down the I/O Module. Factors external to the I/O
Module may have caused this situation.
Recommended Check the chassis event log for fan issues and fix any issues present. If no fan issues are
Response Action detected, check chassis ambient temperature and make sure the temperature is within
operating range. Utilize the RACADM command "racadm getsensorinfo" to check the chassis
ambient temperature.
Category Audit
SubCategory TMP = Temperature
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

TMP8501

Message Unable to read planar board temperature sensors. The cooling has been increased to
safeguard the system.
Detailed System was unable to read planar board or control panel temperature sensors. The fan speed
Description was increased to protect system hardware.
Recommended Remove AC power from the system and reapply AC power. Check to see if the issue is
Response Action resolved. If the issue persists, contact your service provider.
Category Audit
SubCategory TMP = Temperature
arg1 temperature exceeded operating range.
arg1 = iom slot name
•
Email LC Log
Alert
FALSE TRUE
LCD Power Off Power
Cycle
FALSE FALSE FALSE
44
Reset
FALSE
819