Tmp1003; Tmp5 - Dell PowerEdge VRTX Reference Manual

Recommended Check for factors that may cause overheating. For example, verify that the enclosure fan is
Response Action working. You should also check the thermostat settings and examine whether the enclosure is
located near a heat source. Make sure the enclosure has enough ventilation and that the room
temperature is not too hot. Refer to the enclosure documentation for more diagnostic
information.
Category Storage
SubCategory TMP = Temperature
Severity Severity 1 (Critical)
Trap/EventID 4209
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

TMP1003

Message arg1 has crossed the minimum failure threshold.
Arguments
Detailed The enclosure is too cold.
Description
Recommended Check whether the thermostat setting is too low and whether the room temperature is too cool.
Response Action
Category Storage
SubCategory TMP = Temperature
Severity Severity 1 (Critical)
Trap/EventID 4209
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

TMP5

Message The temperature probe maximum warning value was changed on
822
Email LC Log
Alert
TRUE TRUE
arg1 = tempsensor name
•
Email LC Log
Alert
TRUE TRUE
LCD Power Off Power
Cycle
TRUE FALSE FALSE
LCD Power Off Power
Cycle
TRUE FALSE FALSE
Reset
FALSE
Reset
FALSE
arg1 .