Pwr8566 - Dell PowerEdge VRTX Reference Manual

Detailed The Chassis Management Controller is unable to communicate with the iDRAC service
Description processor for the Server identified in the message and the Server could not be turned off. This
situation may occur when iDRAC is rebooting.
Recommended Do the following: 1) Wait for a few minutes for the iDRAC service processor to complete
Response Action startup. 2) Retry the operation. 3) If the issue persists, reset the iDRAC and wait a few minutes
for the iDRAC startup to complete before retrying the operation.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 1 (Critical)
Trap/EventID 8417
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#EMAIL Alert;#LC Log;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

PWR8566

Message Unable to turn off the Server
Arguments
Detailed Unable to turn off the Server before the Power Off timer has expired. This happens if the Server
Description did not show "power off" status change within 30 seconds after the operation was initiated.
This situation may also occur when iDRAC is rebooting.
Recommended The Server may need more time to turn off. Wait for ten seconds and check the power status. If
Response Action the Server was not turned off, retry the operation. If the issue persists, remove and reinsert the
Server, wait for the iDRAC to complete startup, and retry the operation.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE
Email LC Log
Alert
TRUE TRUE
arg1 before the Power Off timer expired.
arg1 = server number
•
Email LC Log
Alert
FALSE TRUE
LCD Power Off Power
Cycle
FALSE FALSE FALSE
LCD Power Off Power
Cycle
FALSE FALSE FALSE
Reset
FALSE
Reset
FALSE
579