SubCategory
PWR = Power Usage
Severity
Severity 3 (Informational)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
IPMI Alert SNMP
Visibility
Alert
FALSE
FALSE
FALSE
PWR8552
Message
Chassis Management Controller is unable to turn on
Arguments
Detailed
There is insufficient power for the component identified in the message to turn on.
Description
Recommended
Make sure there is enough power supply to distribute power. Using the CMC Web UI, go to
Response Action
Chassis Overview > Power > Power Budget Status. In the Total Input Power Available For
Allocation field view the available power. To add more power, insert more PSUs or remove
unused components from the chassis. Contact your service provider for information on the
power required for the component identified in the message.
Category
Audit
SubCategory
PWR = Power Usage
Severity
Severity 2 (Warning)
Trap/EventID
8418
LCD Message
No LCD message display defined.
Initial Default.
SNMP Alert;#EMAIL Alert;#LC Log;#Remote System Log
Filter
IPMI Alert SNMP
Visibility
Alert
TRUE
FALSE
TRUE
PWR8554
Message
Chassis Management Controller is unable to send power allocation information to
priority
Arguments
Email
LC Log
Alert
FALSE
TRUE
arg1 = component name
•
arg2 = component id
•
Email
LC Log
Alert
TRUE
TRUE
arg3 .
arg1 = component name
•
arg2 = component id
•
LCD
Power Off Power
Cycle
FALSE
FALSE
FALSE
arg1 - arg2 because of insufficient power.
LCD
Power Off Power
Cycle
FALSE
FALSE
FALSE
Reset
FALSE
Reset
FALSE
arg1 - arg2 at
573