Rac Event Messages; Rac038; Rac039 - Dell PowerEdge VRTX Reference Manual

RAC Event Messages

RAC038

Message Unable to perform the operation due to an unknown error in iDRAC.
Detailed The operation failed to run due to an unknown error in iDRAC.
Description
Recommended Retry the action. If this fails, reset iDRAC.
Response Action
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

RAC039

Message Invalid parameter value for
Arguments
Detailed The value provided for the specified parameter is invalid.
Description
Recommended Verify the value for the specified parameter. Refer to the Lifecycle Controller-Remote Services
Response Action documentation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Email LC Log
Alert
FALSE FALSE
arg1 .
arg1 = parameter
•
LCD Power Off Power
Cycle
FALSE FALSE FALSE
30
Reset
FALSE
619