Severity
Severity 1 (Critical)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
IPMI Alert SNMP
Visibility
Alert
FALSE
FALSE
FALSE
CMC8545
Message
Detected a missing process failover condition detected. Process =
Arguments
Detailed
A firmware error has occurred causing a CMC failover. The process identified in the message
Description
was not detected. The CMC will restart automatically.
Recommended
No response action is required. If multiple failovers occur, contact your service provider.
Response Action
Category
Audit
SubCategory
CMC = Chassis Management Controller
Severity
Severity 1 (Critical)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
IPMI Alert SNMP
Visibility
Alert
FALSE
FALSE
FALSE
CMC8546
Message
Issues identified witrh Process
Arguments
Detailed
A firmware error has occurred in the internal firmware process identified in the message. This
Description
condition will cause a CMC failover to occur. If the issue persists, contact your service
provider.
Recommended
No response action is required. A failover may result from this condition. If multiple failovers
Response Action
occur, contact your service provicer.
Email
LC Log
Alert
FALSE
TRUE
arg1 = process name
•
Email
LC Log
Alert
FALSE
TRUE
arg1 = process name
•
LCD
Power Off Power
FALSE
FALSE
LCD
Power Off Power
FALSE
FALSE
arg1 . Failover condition detected
Reset
Cycle
FALSE
FALSE
arg1 .
Reset
Cycle
FALSE
FALSE
125