Cmc8538; Cmc8539 - Dell PowerEdge VRTX Reference Manual

Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

CMC8538

Message Firmware version string is too long.
Detailed The length of the CMC firmware version to be sent in the message from local CMC to peer CMC
Description is too long. Under these conditions, CMC version in the message is displayed as 1.0.
Recommended No response action is required.
Response Action
Category Audit
SubCategory CMC = Chassis Management Controller
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

CMC8539

Message The CMC
Arguments
Detailed CMC cannot log new events to Hardware Log if Hardware Log is full. Therefore, new events
Description are not written to the log unless older events are cleared. This issue also occurs if event
logging is disabled.
Recommended Do the following: 1) Save the Hardware Log if required. 2) Clear the Hardware Log.
Response Action
Category Audit
SubCategory CMC = Chassis Management Controller
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
122
Email LC Log
Alert
TRUE TRUE
Email LC Log
Alert
FALSE TRUE
arg1 is unable to log arg2 event to the Hardware Log.
arg1 = slot id
•
arg2 = event message
•
LCD Power Off Power
Cycle
FALSE FALSE FALSE
LCD Power Off Power
Cycle
FALSE FALSE FALSE
Reset
FALSE
Reset
FALSE