Detailed
The Virtual Reseat initiated on the Sleeve identified in the message successfully turned off the
Description
Sleeve. However, the Sleeve did not turn on successfully. A Virtual Reseat is the same as
removing and inserting a Sleeve.
Recommended
Retry the Virtual Reseat operation on the Sleeve identified in the message. If the issue persists,
Response Action
manually remove and reinsert the Sleeve in the chassis.
Category
Audit
SubCategory
PWR = Power Usage
Severity
Severity 2 (Warning)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
IPMI Alert SNMP
Visibility
Alert
FALSE
FALSE
FALSE
PWR8577
Message
A Virtual Reseat operation is initiated on Sleeve
Arguments
Detailed
A Virtual Reseat operation is initiated on the Sleeve identified in the message. A Virtual Reseat
Description
is the same as removing and inserting a Sleeve.
Recommended
No response action is required.
Response Action
Category
Audit
SubCategory
PWR = Power Usage
Severity
Severity 3 (Informational)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
IPMI Alert SNMP
Visibility
Alert
FALSE
FALSE
FALSE
PWR8578
Message
Chassis Management Controller is unable to turn on the iDRAC on server-
required is less than available power.
Email
LC Log
Alert
FALSE
TRUE
arg1 = sleeve number
•
Email
LC Log
Alert
FALSE
TRUE
LCD
Power Off Power
Cycle
FALSE
FALSE
FALSE
arg1 .
LCD
Power Off Power
Cycle
FALSE
FALSE
FALSE
Reset
FALSE
Reset
FALSE
arg1 because power
585