Tmp1001; Tmp1002 - Dell PowerEdge VRTX Reference Manual

Category Storage
SubCategory TMP = Temperature
Severity Severity 2 (Warning)
Trap/EventID 4210
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

TMP1001

arg1 has crossed the minimum warning threshold.
Message
Arguments
Detailed The enclosure is too cold.
Description
Recommended Check whether the thermostat setting is too low and whether the room temperature is too cool.
Response Action
Category Storage
SubCategory TMP = Temperature
Severity Severity 2 (Warning)
Trap/EventID 4210
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

TMP1002

arg1 has exceeded the maximum failure threshold.
Message
Arguments
Detailed The enclosure is too hot. A variety of factors can cause the excessive temperature. For
Description example, a fan may have failed, the thermostat may be set too high, or the room temperature
may be too hot.
Email LC Log
Alert
TRUE TRUE
• arg1 = tempsensor name
Email LC Log
Alert
TRUE TRUE
arg1 = tempsensor name
•
LCD Power Off Power
Cycle
TRUE FALSE FALSE
LCD Power Off Power
Cycle
TRUE FALSE FALSE
Reset
FALSE
Reset
FALSE
821