Swc8508; Swc8509 - Dell PowerEdge VRTX Reference Manual

Detailed A new Profile identified in the message has been created.
Description
Recommended No response action is required.
Response Action
Category Audit
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

SWC8508

Message Unable to capture Profile from server in slot
Arguments
Detailed Unable to communicate with iDRAC.
Description
Recommended Check if iDRAC is ready and system is running properly. Utilize the RACADM command by
Response Action running "racadm getversion" to list all the servers and make sure the iDRAC version is
displayed. If the iDRAC is listed as Not Ready then wait until it becomes ready. A Virtual Reseat
may be required.
Category Audit
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

SWC8509

Message Unable to apply
Email LC Log
Alert
FALSE TRUE
• arg1 = slot number
Email LC Log
Alert
FALSE TRUE
arg1 Profile to server in slot arg2
LCD Power Off Power
Cycle
FALSE FALSE FALSE
arg1
LCD Power Off Power
Cycle
FALSE FALSE FALSE
Reset
FALSE
Reset
FALSE
761