Psu8515; Psu8516 - Dell PowerEdge VRTX Reference Manual

Detailed Unable to update the PSU firmware due to PMBus communication errors.
Description
Recommended Retry the firmware update operation. If the problem persists, contact your service provider.
Response Action
Category Audit
SubCategory PSU = Power Supply
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

PSU8515

Message Unable to set the Enable Dynamic Power Supply Engagement attribute.
Detailed Unable to set the Enable Dynamic Power Supply Engagement attribute.
Description
Recommended Do the following: 1) Retry the operation. 2) If the issue persists, review the tracelog for more
Response Action details. To retrieve the tracelog, in the CMC Web interface, go to Troubleshooting >
Diagnostics page and enter the "gettracelog" command, or use RACADM "gettracelog"
command. If the issue continues to persist, contact your service provider and provide the
tracelog.
Category Audit
SubCategory PSU = Power Supply
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

PSU8516

Message Unable to set redundancy policy because PSU enumeration is in progress.
Email LC Log LCD
Alert
FALSE TRUE FALSE
Email LC Log LCD
Alert
FALSE TRUE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE
515