Pst Event Messages; Pst0128; Pst0128 Message; Pst0129 - Dell PowerEdge VRTX Reference Manual

Dell poweredge vrtx chassis management controller firmware event message reference guide version 1.0
Hide thumbs Also See for PowerEdge VRTX:
Table of Contents

Advertisement

PST Event Messages

PST0128

Message
No memory is detected.
Detailed
System BIOS was unable to detect memory in the system . This exception occurred early in
Description
system power on, thus the system may not display video (BIOS Post Exception 80).
Recommended
Inspect System Memory.
Response Action
Category
System Health
SubCategory
PST = BIOS POST
Severity
Severity 1 (Critical)
Trap/EventID
FALSE
LCD Message
No memory is detected. Inspect memory devices
Initial Default.
FALSE
Filter
IPMI Alert SNMP
Visibility
Alert
FALSE
FALSE
FALSE

PST0129

Message
Memory is detected, but is not configurable.
Detailed
System BIOS detected memory, but was unable to configure the memory for system operation.
Description
Compare system memory installation to supported system memory configurations. Reduce the
system to minimum memory configuration if acceptable. This exception occurred early in
system power on, thus the system may not display video.(BIOS POST Exception Code 81).
Recommended
Compare system memory installation to supported system memory configurations.
Response Action
Category
System Health
SubCategory
PST = BIOS POST
Severity
Severity 1 (Critical)
Trap/EventID
FALSE
LCD Message
Memory is detected, but is not configurable. Check memory devices
Initial Default.
FALSE
Email
LC Log
LCD
Alert
FALSE
FALSE
FALSE
Power Off Power
Reset
Cycle
FALSE
FALSE
FALSE
26
497

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents