Vdr55; Vdr56 - Dell PowerEdge VRTX Reference Manual

Severity Severity 2 (Warning)
Trap/EventID 4354
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

VDR55

arg1 initialization has failed.
Message
Arguments
Detailed The controller cannot communicate with attached devices. A disk may be removed or contain
Description errors. Cables may also be loose or defective.
Recommended Verify the health of attached devices. Review the Alert Log for significant events. Make sure
Response Action the cables are attached securely. See the Cables Attached Correctly section for more
information on checking the cables.
Category Storage
SubCategory VDR = Virtual Disk
Severity Severity 1 (Critical)
Trap/EventID 4353
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

VDR56

Message Redundancy of
Arguments
Detailed This message occurs when a physical disk in the disk group was removed or when a physical
Description disk included in a redundant virtual disk fails. Because the virtual disk is redundant (uses
mirrored or parity information) and only one physical disk has failed, the virtual disk can be
rebuilt. Typically, the virtual disk (E.g. RAID 6) has multiple redundant disks and there is a
problem with one of them.
886
Email LC Log
Alert
TRUE TRUE
arg1 = VD Name
•
Email LC Log
Alert
TRUE TRUE
arg1 has been degraded.
arg1 = virtual disk
•
LCD Power Off Power
Cycle
TRUE FALSE FALSE
LCD Power Off Power
Cycle
TRUE FALSE FALSE
Reset
FALSE
Reset
FALSE