Jcp014; Jcp015 - Dell PowerEdge VRTX Reference Manual

Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

JCP014

Message Maximum jobs per queue exceeded.
Detailed The number of jobs specified in the SetupJobQueue request combined with the existing job
Description count contains more jobs IDs than the maximum number of jobs supported by the system (256).
Completed jobs are automatically deleted if they are older than the delete on completion
timeout setting.
Recommended Reduce the number of jobs specified in the operation or reduce the existing job count before
Response Action retrying the operation. Perform one of the following to reduce the job count: 1) Delete one or
more jobs and retry the operation. 2) Wait until existing jobs have an elapsed time since
completion that is greater than the delete on completion timeout setting and are automatically
deleted. 3) Change the delete on completion timeout setting to a smaller value so that
completed jobs are automatically deleted sooner.
Category Configuration
SubCategory JCP = Job Control
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

JCP015

Message A running job cannot be deleted.
Detailed The job is currently executing and cannot be deleted. The job needs to finish running, whether
Description successful or not, before it can be deleted.
Recommended Wait for the job to have a completed job status. Retry the operation.
Response Action
Category Configuration
Email LC Log LCD
Alert
FALSE FALSE FALSE
Email LC Log LCD
Alert
FALSE FALSE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE
321