Stor012; Stor013; Stor015 - Dell PowerEdge VRTX Reference Manual

STOR012

Message Provided Physical disk not valid for this operation
Detailed One or more of provided physical disks cannot be used.
Description
Recommended Check the RAID profile for correct status and use of provided physical disk(s)
Response Action
Category Configuration
SubCategory STOR = Storage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

STOR013

Message One or more Storage device(s) are not in a state where the operation can be completed.
Detailed One or more storage device(s) are in a state that prevents the command from completing.
Description
Recommended Run command again
Response Action
Category Configuration
SubCategory STOR = Storage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

STOR015

Message Maximum virtual disks allowed for this controller has been reached
722
Email LC Log LCD
Alert
FALSE FALSE FALSE
Email LC Log LCD
Alert
FALSE FALSE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE