Enc2; Enc3 - Dell PowerEdge VRTX Reference Manual

Severity Severity 3 (Informational)
Trap/EventID 4339
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

ENC2

arg1 was removed..
Message
Arguments
Detailed An Enclosure Management Module (EMM) was removed.
Description
Recommended Reinsert the Enclosure Management Module (EMM). See the storage hardware documentation
Response Action for information on replacing the EMM.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 1 (Critical)
Trap/EventID 4337
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

ENC3

arg1 is shutdown.
Message
Arguments
Detailed The physical disk enclosure is either hotter or cooler than the maximum or minimum allowable
Description temperature range.
Recommended Check for factors that may cause overheating or excessive cooling. For example, verify that the
Response Action enclosure fan is working. You should also check the thermostat settings and examine whether
the enclosure is located near a heat source. Make sure the enclosure has enough ventilation
and that the room temperature is not too hot or too cold. Refer to the enclosure documentation
for more diagnostic information.
212
Email LC Log
Alert
TRUE TRUE
arg1 = Enclosure Management Module Name
•
Email LC Log
Alert
TRUE TRUE
arg1 = Enclosure Name
•
LCD Power Off Power
Cycle
TRUE FALSE FALSE
LCD Power Off Power
Cycle
TRUE FALSE FALSE
Reset
FALSE
Reset
FALSE