Swc8528; Swc8529 - Dell PowerEdge VRTX Reference Manual

Recommended Make sure the user name is valid. If communication with iDRAC is not successful, reset the
Response Action iDRAC. Retry the operation after a few minutes.
Category Audit
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

SWC8528

Message Chassis Management Controller is unable to update the iDRAC root password.
Detailed The Chassis Management Controller is unable to update the IDRAC "root" user password. This
Description can happen if the communction to the iDRAC from CMC is non-functional or if the password
entered is not valid.
Recommended Make sure the password is valid. If communications with the iDRAC is not functioning, reset
Response Action the iDRAC and retry the operation after a few minutes. Run the RACADM command "racadm
ping server-<slot number> " to check the communications. If the communications are not
functional, restart the iDRAC by performing a Virtual Reseat of the server using the RACADM
command "racadm racreset -m server-<slot id>".
Category Audit
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

SWC8529

Message Chassis Management Controller unable to enable the iDRAC root user.
Detailed The Chassis Management Controller is unable to enable the iDRAC root user. This can happen
Description if the communction to the iDRAC from CMC is non-functional or iDRAC is rebooting
772
Email LC Log LCD
Alert
FALSE TRUE FALSE
Email LC Log LCD
Alert
FALSE TRUE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE