Pwr8582; Pwr8583 - Dell PowerEdge VRTX Reference Manual

Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

PWR8582

Message Chassis Management Controller is unable to turn on server-
Conservation Mode is enabled.
Arguments
Detailed Unable to turn on the server identified in the message because the Max Power Conservation
Description Mode (MPCM) is enabled. After MPCM is enabled, the chassis will be in power conservation
mode and the CMC cannot process any further server power on operation requests.
Recommended Disable the Max Power Conservation Mode and retry the operation.
Response Action
Category Audit
SubCategory PWR = Power Usage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

PWR8583

Message Chassis Management Controller is unable to turn on server-
110V PSUs are present.
Arguments
Detailed To enable 110V operation, the Allow 110VAC Operation feature must be enabled. If the feature
Description is not enabled, the server turn-on operation will not be processed.
Recommended On the Power Configuration page, in the Web UI, select the Allow 110VAC Operation for power
Response Action supplies and retry the operation. Using the RACADM utility, run the following command,
"racadm config -g cfgChassisPower -o cfgChassisAllow110VACOperation 1".
Category Audit
SubCategory PWR = Power Usage
Severity Severity 3 (Informational)
588
Email LC Log
Alert
FALSE TRUE
arg1 = slot number
•
Email LC Log
Alert
FALSE FALSE
arg1 = slot number
•
LCD Power Off Power
Cycle
FALSE FALSE FALSE
arg1 because Max Power
LCD Power Off Power
Cycle
FALSE FALSE FALSE
arg1 because unacknowledged
Reset
FALSE
Reset
FALSE