Tmp8502; Tmp1000 - Dell PowerEdge VRTX Reference Manual

Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

TMP8502

Message Able to read planar board temperature sensors. Cooling set for normal chassis operation.
Detailed The system has recovered from being unable to read planar board or control panel
Description temperature sensors.
Recommended No response action required.
Response Action
Category Audit
SubCategory TMP = Temperature
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

TMP1000

arg1 exceeded the maximum warning threshold.
Message
Arguments
Detailed The enclosure is too hot. A variety of factors can cause the excessive temperature. For
Description example, a fan may have failed, the thermostat may be set too high, or the room temperature
may be too hot.
Recommended Check for factors that may cause overheating. For example, verify that the enclosure fan is
Response Action working. You should check the thermostat settings and examine whether the enclosure is
located near a heat source. Make sure the enclosure has enough ventilation and that the room
temperature is not too hot. Refer to the enclosure documentation for more diagnostic
information.
820
Email LC Log
Alert
FALSE TRUE
Email LC Log
Alert
FALSE TRUE
arg1 = tempsensor name
•
LCD Power Off Power
Cycle
FALSE FALSE FALSE
LCD Power Off Power
Cycle
FALSE FALSE FALSE
Reset
FALSE
Reset
FALSE