Sel Event Messages; Sel0002; Sel0003 - Dell PowerEdge VRTX Reference Manual

SEL Event Messages

SEL0002

Message Logging is disabled.
Detailed This message appears when event logging of a specific type is disabled by the user. (IPMI
Description sensor type code 10h - offset 01h)
Recommended If unintended, re-enable logging.
Response Action
Category System Health
SubCategory SEL = Sys Event Log
Severity Severity 1 (Critical)
Trap/EventID 2377
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

SEL0003

Message Logging is enabled.
Detailed None
Description
Recommended No response action is required.
Response Action
Category System Health
SubCategory SEL = Sys Event Log
Severity Severity 3 (Informational)
Trap/EventID 2379
LCD Message No LCD message display defined.
Initial Default. LC Log
Email LC Log LCD
Alert
TRUE TRUE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE
38
689