Vlt0100 - Dell PowerEdge VRTX Reference Manual

Arguments
Detailed None
Description
Recommended No response action is required.
Response Action
Category System Health
SubCategory VLT = Voltage
Severity Severity 3 (Informational)
Trap/EventID 2171
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

VLT0100

Message Processor module
Arguments
Detailed System hardware detected an over voltage or under voltage condition. If multiple voltage
Description exceptions occur consecutively the system may power down in failsafe mode.
Recommended 1) Review system logs for power supply exceptions. 2) Remove the processor module. Inspect
Response Action processor socket for bent pins. 3) If the problem persists, contact technical support. Refer to
the product documentation to choose a convenient contact method.
Category System Health
SubCategory VLT = Voltage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE
arg1 = name
•
Email LC Log
Alert
TRUE TRUE
arg1 voltage is less than the lower warning threshold.
arg1 = name
•
Email LC Log
Alert
FALSE FALSE
LCD Power Off Power
Cycle
FALSE FALSE FALSE
LCD Power Off Power
Cycle
FALSE FALSE FALSE
Reset
FALSE
Reset
FALSE
921