Pst0141; Pst0142 - Dell PowerEdge VRTX Reference Manual

Detailed System BIOS failed to initialize the system management interrupt. This exception occurred
Description early in system power on, thus the system may not display video. (BIOS POST exception code
8C)
Recommended Remove and reapply input power. If the problem persists, contact technical support. Refer to
Response Action the product documentation to choose a convenient contact method.
Category System Health
SubCategory PST = BIOS POST
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message SMI initialization failed. Power cycle system
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

PST0141

Message QuickPath Interconnect (QPI) fatal error.
Detailed Quick Path Interconnect failed during system POST. Reboot the system. If problem persists,
Description remove input power and reseat processors. This exception occurred early in system power on,
thus the system may not display video.
Recommended Reboot the system. If problem persists, remove input power and reseat processors.
Response Action
Category System Health
SubCategory PST = BIOS POST
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message QuickPath Interconnect (QPI) fatal error. Contact support
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

PST0142

Message MRC fatal error.
Detailed BIOS Memory testing failed. Compare system memory installation to supported system memory
Description configurations. Reduce system configuration to minimum memory configuration. This exception
occurred early in system power on, thus the system may not display video.
Email LC Log LCD
Alert
FALSE FALSE FALSE
Email LC Log LCD
Alert
FALSE FALSE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE
503