Psu8519; Psu8520 - Dell PowerEdge VRTX Reference Manual

Dell poweredge vrtx chassis management controller firmware event message reference guide version 1.0
Hide thumbs Also See for PowerEdge VRTX:
Table of Contents

Advertisement

Detailed
The operation to read the FRU data from the PSU indentified in the message did not complete
Description
successfully due to internal communication errors.
Recommended
Retry the operation. If the condition persists, contact your service provider.
Response Action
Category
Audit
SubCategory
PSU = Power Supply
Severity
Severity 1 (Critical)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
IPMI Alert SNMP
Visibility
Alert
FALSE
FALSE
FALSE

PSU8519

Message
Enhanced Dynamic Power Supply Engagement (DPSE) is not supported by the current power
supply configuration and is suspended.
Detailed
The Dynamic Power Supply Engagement (DPSE) feature is suspended due to the configuration
Description
or the type of PSU present. The feature is enabled, but suspended until a supported PSU
configuration is in place.
Recommended
Dynamic Power Supply Engagement (DPSE) is not supported by the current power supply
Response Action
configuration. Verify the PSUs are supported. Replace the unsupported PSUs.
Category
Audit
SubCategory
PSU = Power Supply
Severity
Severity 2 (Warning)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
IPMI Alert SNMP
Visibility
Alert
FALSE
FALSE
FALSE

PSU8520

Message
Enhanced Dynamic Power Supply Engagement (DPSE) is fully supported.
Detailed
The Dynamic Power Supply Enagement feature is supported and fully operational.
Description
Email
LC Log
LCD
Alert
FALSE
TRUE
FALSE
Email
LC Log
LCD
Alert
FALSE
TRUE
FALSE
Power Off Power
Reset
Cycle
FALSE
FALSE
FALSE
Power Off Power
Reset
Cycle
FALSE
FALSE
FALSE
517

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents