Swu Event Messages; Swu8500; Swu8501 - Dell PowerEdge VRTX Reference Manual

SWU Event Messages

SWU8500

Message The schedule to
Arguments
Detailed This message is displayed when: 1. A reboot job is unable to provide a valid reboot ID. 2. The
Description WSMAN command to set up a job queue on Lifecycle Controller was not successful.
Recommended Retry the operation. If the error persists, contact your service provider.
Response Action
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

SWU8501

Message The schedule to reinstall/rollback Lifecycle Controller on server
Arguments
Detailed This message is displayed when: 1. A reboot job is unable to provide a valid reboot ID. 2. The
Description WSMAN command to set up a job queue on Lifecycle Controller was not successful.
Recommended Retry the operation. If the error persists, contact your service provider.
Response Action
Category Updates
SubCategory SWU = Software Change
arg1 Lifecycle Controller on server arg2 was not successful.
arg1 = update/reinstall/rollback
•
arg2 = slot number
•
Email LC Log
Alert
FALSE TRUE
arg1 = slot number
•
LCD Power Off Power
Cycle
FALSE FALSE FALSE
42
Reset
FALSE
arg1 was not successful.
789