Jcp008; Jcp011 - Dell PowerEdge VRTX Reference Manual

SubCategory JCP = Job Control
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

JCP008

Message Job completed with errors.
Detailed Multiple attributes were set in the operation but some set attribute actions were not
Description successful. For example, setting an attribute that is not valid for the component being
configured,
Recommended Examine the results of the configuration job in the Lifecycle Log for the source of the errors.
Response Action Modify the settings as necessary and resubmit the job.
Category Configuration
SubCategory JCP = Job Control
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

JCP011

Message Invalid parameter value for
Arguments
Detailed The value provided for the specified parameter is invalid and must be corrected for the invoked
Description method to complete successfully.
Recommended To provide the correct value for the specified parameter, see Lifecycle Controller-Remote
Response Action Services documentation. Retry the operation requested with corrected value.
Category Configuration
Email LC Log
Alert
FALSE FALSE
Email LC Log
Alert
FALSE FALSE
arg1
arg1 = parameter
•
LCD Power Off Power
Cycle
FALSE FALSE FALSE
LCD Power Off Power
Cycle
FALSE FALSE FALSE
Reset
FALSE
Reset
FALSE
319