Enc Event Messages; Enc40; Enc1 - Dell PowerEdge VRTX Reference Manual

ENC Event Messages

ENC40

Message A new enclosure was detected on
Arguments
Detailed The controller detected a new enclosure. This is due either to a hot plug of an enclosure, or a
Description power state change of an enclosure. In addition, this message is generated if the daisy chain
order of the enclosures changes.
Recommended No response action is required.
Response Action
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 3 (Informational)
Trap/EventID 4339
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

ENC1

arg1 was inserted.
Message
Arguments
Detailed An Enclosure Management Module (EMM) has failed is inserted into the enclosure.
Description
Recommended No response action is required.
Response Action
Category Storage
SubCategory ENC = Storage Enclosr
arg1 = controller name
•
Email LC Log
Alert
TRUE TRUE
• arg1 = Enclosure Management Module Name
arg1 .
LCD Power Off Power
TRUE FALSE
Reset
Cycle
FALSE FALSE
12
211