Pwr8555 - Dell PowerEdge VRTX Reference Manual

Detailed This situation occurs if the iDRAC is found to be turned off after power allocation information is
Description sent by the CMC or if the communications between the CMC and iDRAC is non functional.
Recommended Perform a Virtual Reseat of the component identified in the message. Using the CMC Web UI,
Response Action go to Chassis Overview > Troubleshooting > Reset Components, and then select slot for the
component identified in the message and apply the Virtual Reseat.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

PWR8555

Message Chassis Management Controller unable to turn on
insufficeint power. Minimum power needed is
Arguments
Detailed The request to turn on the component identified in the message was not successful because
Description insuffficient power is available at the identified priority for the component.
Recommended Make sure there is enough power supply to distribute power. Using the CMC Web UI, go to
Response Action Chassis Overview > Power > Power Budget Status. In the Total Input Power Available For
Allocation field view the available power. To add more power, insert more PSUs or remove
unused components from the chassis.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 2 (Warning)
Trap/EventID 8418
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#EMAIL Alert;#LC Log;#Remote System Log
574
arg3 = priority number
•
Email LC Log
Alert
FALSE TRUE
arg1 = component name
•
• arg2 = slot number
arg3 = priority number
•
arg4 = min power
•
arg5 = avaialble power
•
LCD Power Off Power
Cycle
FALSE FALSE FALSE
arg1 - arg2 at priority arg3 because of
arg4 AC Watt, but only arg5 AC Watt is available.
Reset
FALSE