Cpu0001; Cpu0002 - Dell PowerEdge VRTX Reference Manual

Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

CPU0001

Message CPU
Arguments
Detailed The processor temperature increased beyond the operational range. Thermal protection shut
Description down the processor. Factors external to the processor may have induced this exception.
Recommended Review logs for fan failures, replace failed fans. If no fan failures are detected, check inlet
Response Action temperature (if available) and reinstall processor heatsink.
Category System Health
SubCategory CPU = Processor
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message CPU <number> has a thermal trip. Check CPU heat sink
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

CPU0002

Message CPU
Arguments
Detailed None
Description
Recommended 1) Turn system off and remove input power for one minute. Re-apply input power and turn
Response Action system on. 2) Make sure the processor is seated correctly. 3) If the issue still persists, contact
technical support. Refer to the product documentation to choose a convenient contact method.
Category System Health
140
Email LC Log
Alert
FALSE FALSE
arg1 has a thermal trip (over-temperature) event.
arg1 = number
•
Email LC Log
Alert
FALSE FALSE
arg1 has failed the built-in self-test (BIST).
arg1 = number
•
LCD Power Off Power
Cycle
FALSE FALSE FALSE
LCD Power Off Power
Cycle
FALSE FALSE FALSE
Reset
FALSE
Reset
FALSE