Jcp009 - Dell PowerEdge VRTX Reference Manual

Recommended One of the job ID values specified as input is duplicated. Remove the duplicated Job ID from
Response Action the operation input parameters and retry the operation.
Category Configuration
SubCategory JCP = Job Control
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

JCP009

Message Scheduled job was cancelled.
Detailed Scheduled jobs were deleted as a result of a cancel job request. The job cancellation request
Description is manually or programmatically initiated. Lifecycle Controller enters Recovery mode when
unrecoverable and persistent errors occur.
Recommended If the job was not cancelled manually, then Lifecycle Controller may be in Recovery mode. To
Response Action verify or change Recovery mode, use F2 Setup to select iDRAC Configuration then Lifecycle
Controller Settings.
Category Configuration
SubCategory JCP = Job Control
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE
324
Email LC Log LCD
Alert
FALSE FALSE FALSE
Email LC Log LCD
Alert
FALSE FALSE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE