Swc8522; Swc8523 - Dell PowerEdge VRTX Reference Manual

Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

SWC8522

Message Chassis Group Leader update of member
Arguments
Detailed Successfully completed a configuration sync with the member identified in the message.
Description
Recommended No response action required.
Response Action
Category Audit
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

SWC8523

Message Unable to complete Chassis Group Leader update of member
Arguments
Detailed Unable to complete a configuration sync with the member identified in the message.
Description
Recommended Check the communications between the Chassis Group Leader and the member. Run the
Response Action RACADM command "racadm ping <DNS or IP address> " to check the communications. If the
communications are not functional, resolve the communications issue. If the communications
are functional, remove the member from the group and re-add the member. If the issue
persists, contact your service provider.
Category Audit
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Email LC Log
Alert
FALSE TRUE
arg1 = member id
•
Email LC Log
Alert
FALSE TRUE
arg1 = DNS or IP address
•
LCD Power Off Power
Cycle
FALSE FALSE FALSE
arg1 configuration successful.
LCD Power Off Power
Cycle
FALSE FALSE FALSE
arg1 .
Reset
FALSE
Reset
FALSE
769