Swu8537; Swu8538 - Dell PowerEdge VRTX Reference Manual

Dell poweredge vrtx chassis management controller firmware event message reference guide version 1.0
Hide thumbs Also See for PowerEdge VRTX:
Table of Contents

Advertisement

Severity
Severity 2 (Warning)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
IPMI Alert SNMP
Visibility
Alert
FALSE
FALSE
FALSE

SWU8537

Message
Unable to update the LKVM firmware, because the IP address provided is invalid.
ErrorCode=0x
Arguments
Detailed
The LKVM firmware update operation was not successful, because the IP address of the active
Description
CMC that is provided to the LKVM is invalid.
Recommended
Make sure the CMC IP address entered is valid, and then retry the Update operation.
Response Action
Category
Updates
SubCategory
SWU = Software Change
Severity
Severity 2 (Warning)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
IPMI Alert SNMP
Visibility
Alert
FALSE
FALSE
FALSE

SWU8538

Message
Unable to update the iKVM firmware. Reason = 0x
Arguments
Detailed
The iKVM firmware update operation was not successful.
Description
Recommended
Retry the Update operation. If the issue persists, reinsert the iKVM and retry the operation.
Response Action
Email
LC Log
Alert
FALSE
TRUE
arg1 .
arg1 = error no
Email
LC Log
Alert
FALSE
TRUE
arg1 = error no
LCD
Power Off Power
Cycle
FALSE
FALSE
FALSE
LCD
Power Off Power
Cycle
FALSE
FALSE
FALSE
arg1 .
Reset
FALSE
Reset
FALSE
805

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents