Enc19; Enc21 - Dell PowerEdge VRTX Reference Manual

Detailed The controller has lost communication with an Enclosure Management Module (EMM). The
Description cables may be loose or defective.
Recommended Make sure the cables are attached securely. See the storage hardware documentation for
Response Action more information on checking the cables. Reboot the system.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 1 (Critical)
Trap/EventID 4337
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

ENC19

arg1 has failed.
Message
Arguments
Detailed An Enclosure Management Module (EMM) has failed. The failure may be caused by a loss of
Description power to the EMM. The EMM self-test may also have identified a failure. There may also be a
firmware problem or a multi-bit error.
Recommended Reseat the Enclosure Management Module (EMM). See the storage hardware documentation
Response Action for information on replacing the EMM. Replace the EMM. Contact technical support if the issue
persists.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 1 (Critical)
Trap/EventID 4337
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

ENC21

arg1 has been removed.
Message
Email LC Log
Alert
TRUE TRUE
• arg1 = Enclosure Management Module Name
Email LC Log
Alert
TRUE TRUE
LCD Power Off Power
Cycle
TRUE FALSE FALSE
LCD Power Off Power
Cycle
TRUE FALSE FALSE
Reset
FALSE
Reset
FALSE
221