Psu1000; Psu1003 - Dell PowerEdge VRTX Reference Manual

Recommended No response action is required.
Response Action
Category Audit
SubCategory PSU = Power Supply
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

PSU1000

Message Power supply cable has been removed from
Arguments
Detailed The power supply unit is not receiving input AC power. The power cable may not be connected
Description properly or removed. This can happen if there is an AC failure or problems with the power strip
attached to the enclosure power supply.
Recommended Reconnect the power cable to the power supply unit if it was disconnected. Restore the input
Response Action AC power supply. Make sure the power supply is restored to the enclosure from the mains.
Category Storage
SubCategory PSU = Power Supply
Severity Severity 2 (Warning)
Trap/EventID 4234
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

PSU1003

arg1 is switched OFF.
Message
Arguments
518
Email LC Log
Alert
FALSE TRUE
• arg1 = PSU Sensor Name
Email LC Log
Alert
TRUE TRUE
• arg1 = PSU Sensor Name
LCD Power Off Power
Cycle
FALSE FALSE FALSE
arg1 .
LCD Power Off Power
Cycle
TRUE FALSE FALSE
Reset
FALSE
Reset
FALSE