Cmc8529; Cmc8531 - Dell PowerEdge VRTX Reference Manual

Detailed CMC is unable to obtain the link tuning information for the newly installed hardware (server,
Description Input Output Module, or Mezzanine card), or is unable to send the link tuning information to
iDRAC.
Recommended Make sure that the currently installed CMC firmware is the latest. Otherwise, update the CMC
Response Action with the latest CMC firmware and retry the operation.
Category System Health
SubCategory CMC = Chassis Management Controller
Severity Severity 2 (Warning)
Trap/EventID 2546
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#EMAIL Alert;#LC Log;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

CMC8529

Message Unable to perform the requested action on the server-
Arguments
Detailed The user account does not have sufficient privileges to perform the requested operation.
Description Server Administrator privilege is required to perform the requested action.
Recommended Use a different user account that has Server Administrator privilege, and retry the operation.
Response Action For more information, contact your system administrator or service provider.
Category Audit
SubCategory CMC = Chassis Management Controller
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

CMC8531

Message Unable to perform the requested action on the sleeve
privileges.
Email LC Log
Alert
TRUE TRUE
arg1 = slot number
•
Email LC Log
Alert
FALSE TRUE
LCD Power Off Power
Cycle
FALSE FALSE FALSE
arg1 , because of insufficient privileges.
LCD Power Off Power
Cycle
FALSE FALSE FALSE
arg1 because of insufficient user
Reset
FALSE
Reset
FALSE
119